We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
FOL7250B059
Part number
542408
Type
Remote I/O System
Description
PROFIBUS Fiber Optic Link Coupler and Repeater FOL7250
Stock availability:
On request
Product Description |
---|
PROFIBUS Fiber Optic Link Coupler and Repeater |
Supply | ||
---|---|---|
Connection | redundant | |
Rated voltage | 18 ... 32 V , typical: 24 V | |
Rated current | approx. 200 mA | |
Power consumption | 4.8 W | |
Fieldbus interface | ||
Fieldbus type | PROFIBUS DP, DP V1, DP V2, FMS | |
Terminating resistor | integrated, switchable on | |
Electrical specifications | ||
Signal delay | < 6.5 bit times | |
Signal contact (safety extra-low voltage) | max. DC 60 V, AC 24 V, 1 A (Ex e) | |
Interface | ||
Interface type | RS-485 | |
Transfer rate | 9.6, 19.2, 93.75, 187.5, 500, 1500 kBit/s 3, 6, 12 Mbit/s self-synchronizing | |
External bus | ||
Connection | spring terminals, max. 1.5 mm2 | |
Redundancy | HIPER ring | |
Fiber optics | ||
Wave length | 860 nm | |
Optical input power | min. -28 dBm, max. -3 dBm | |
Launchable optical power | in multi-mode fiber (50/125): (50/125): -15 dBm (62,5/125): - 13 dBm | |
Cable length | Multi-mode fiber (MM) 50/125: 3000 m, 13 dB link budget at 860 nm, A = 3 dB/km, 3 dB buffer Multi-mode fiber (MM) 62,5/125: 3000 m, 15 dB link budget at 860 nm, A = 3,5 dB/km, 3 dB buffer | |
Connector type | BFOC/2.5 | |
Galvanic isolation | ||
PROFIBUS DP/Supply | functional insulation acc. to DIN EN 50178 | |
Indicators/settings | ||
LED indicator | LED System (red/green): Operating voltage and bitrate, LED CH1 (red/yellow): electric channel, LED CH2, CH3 (red/yellow): optic channel | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-4-2/3/4/5/6, EN 55022, NE 21 | |
Degree of protection | IEC 60529 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Relative humidity | max. 100 % , moisture condensation allowable | |
Vibration resistance | 1 g , 58 ... 150 Hz according to IEC 60068-2-6 | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Cable | ||
Length | 200 m ... 1000 m, depending on baud rate | |
Mass | 1500 g | |
Dimensions | 156 x 125 x 75 mm | |
Mounting | DIN rail mounting | |
Data for application in connection with hazardous areas | ||
EU-Type Examination Certificate | PTB 07 ATEX 2021 X | |
Marking | II 2 G Ex e mb [ib] op is IIC T4 | |
Directive conformity | ||
Directive 94/9/EC | EN 60079-0:2006 EN 60079-7:2007 EN 60079-11:2007 EN 60079-18:2004 EN 60079-28:2007 | |
International approvals | ||
ATEX approval | PTB 07 ATEX 2021X | |
GOST-R approval | RU C-IT.MIII06.B.00129 | |
INMETRO | Brazil: TÜV 14.1594X | |
Marine approval | ||
Lloyd Register | c15-20021 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |