We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
M-LB-Ex-5211
Part number
256924
Type
Module
Description
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Product Description |
|---|
| Protection module for 1 signal line |
| General specifications | ||
|---|---|---|
| Number of protected signal lines | 1 | |
| Topology | non-grounded | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Connection | via Universal Power Rail M-UPR-03-S | |
| Nominal voltage | see power feed module M-LB-5300 | |
| Current | &le, 8 mA | |
| Electrical specifications | ||
| Connection | protected area: terminal 4 unprotected area: terminals 1, 2, 3 | |
| Rated current | 500 mA , restrictions see derating characteristics | |
| Leakage current | < 5 µ,A x (number of used modules - 1) at 1 V and 25 °C (77 °F) . line-line | |
| Nominal voltage | 1 V DC | |
| Maximum continuous operating voltage | 6 V DC | |
| Series resistance | &le, 0.6 &Omega, per line | |
| Impulse rating | 1 kV/0.5 kA (category C1) 10 kV/5 kA (category C2) 1 kA (category D1) | |
| Impulse discharge current (10/350 µ,s) | 1 kA per line (2x) | |
| Nominal discharge current (8/20 µ,s) | 5 kA per line (10x) | |
| Rated surge current (8/20 µ,s) | 10 kA per line (1x) | |
| Total discharge current (8/20 µ,s) | 10 kA (1x) | |
| Voltage protection level | max. 22 V line-line for nominal discharge current In max. 1400 V line-earth for nominal discharge current In | |
| Impulse reset time | < 500 ms | |
| Insertion loss | &le, 0.05 dB, at 0 ... 4 kHz, in 600 &Omega,-System &le, 3 dB, at 0 ... 350 kHz, in 100 &Omega,-System | |
| Output | ||
| Status indication | fault and maintenance signal via Universal Power Rail M-UPR-03-S | |
| Galvanic isolation | ||
| Signal lines/fault indication output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
| Signal lines/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
| Indicators/settings | ||
| Display elements | LED PWR (power supply), green LED LED FLT (fault signal), red LED LED CHK (maintenance signal), yellow LED | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Degree of protection | IEC 60529:2013 | |
| Functional safety | IEC/EN 61508:2010 | |
| Surge protective devices for low voltage | EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) Observe the temperature range limited by derating, see section derating. | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 95 % , without condensation | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 20 g | |
| Dimensions | 6.2 x 77 x 79 mm | |
| Mounting | pluggable in base module for mounting on 35 mm DIN mounting rail | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | BVS 17 ATEX E 069 X | |
| Marking | II 3(1)G Ex ec [ia Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I | |
| Voltage | 6 V | |
| Current | 500 mA , restrictions see derating characteristics | |
| Internal capacitance | negligible | |
| Internal inductance | 18 µ,H | |
| Supply | ||
| Maximum safe voltage | 60 V AC/DC (Attention! The rated voltage can be lower.) | |
| Fault indication output | ||
| Maximum safe voltage | 60 V AC/DC (Attention! The rated voltage can be lower.) | |
| Galvanic isolation | ||
| Signal lines/fault indication output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Signal lines/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 | |
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | IECEx BVS 17.0061X | |
| IECEx marking | Ex ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Designation | system components: - base module with screw terminals M-LB-Ex-5000 - base module with spring terminals M-LB-Ex-5000.SP - power feed module M-LB-5300 - fault status module M-LB-5400 - maintenance status module M-LB-5500 - universal power rail M-UPR-03-S - place holder module M-LB-Ex-5900 - separation wall M-UPR-I |
