We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
HIC2077
Part number
220200
Type
Repeater
Description
Stock availability:
On request
General specifications | ||
---|---|---|
Signal type | Analog input | |
Supply | ||
Connection | SL1: 1a(-), 1b(-), 2a(+), 2b(+) | |
Rated voltage | 20 ... 30 V DC bus powered via Termination Board | |
Ripple | within the supply tolerance | |
Rated current | < 20 mA | |
Power consumption | 0.35 W (24 V and 1 mA sense current) | |
Input | ||
Connection side | field side | |
Connection | SL2: 5a(+), 1a(+), 1b(-), 5b(-) | |
Line fault detection | at Pt100 | |
Lead resistance | &le, 10 % of resistance value | |
Transmission range | 0 ... 10 mA | |
Available voltage | 9 V | |
Line fault detection | 8 nA | |
Output | ||
Connection side | control side | |
Connection | SL1: 8a(+), 10a(+), 7a(-), 9a(-) | |
Current | 0 ... 10 mA | |
Available voltage | 0 ... 4.2 V | |
Fault signal | 400 &Omega,, depending on lead disconnected (measuring current &le, 1mA) | |
Transfer characteristics | ||
Accuracy | < ± 0.1 % of full-scale value | |
Deviation | Im &ge, 1 mA: ±0.1 % of Rm or ± 0.1 &Omega, (the larger value is applicable) Im < 1 mA: accuracy reduces in proportion to Im. e. g. Im = 0.1 mA: ± 1 % of Rm or 1 &Omega, (the larger value is applicable). | |
Influence of ambient temperature | Im &ge, 1 mA, Rm &ge, 100 &Omega, : 0.01 %/K in the range -20 ... +60 °C (253 ... 333 K) Im < 1 mA or Rm < 100 &Omega,: temperature stability reduces in proportion to Im or Rm | |
Rise time | signal response time &le, 2 ms (10 ... 90 %) response to application of Im: Rm > 50 &Omega, and Im < 5mA: <5msresponse to application of Im: Rm> 30 &Omega, and Im < 5mA: <10msresponse to application of Im: Rm> 18 &Omega, and Im < 5mA: < 20ms | |
Galvanic isolation | ||
Output/power supply | functional insulation, rated insulation voltage 50 V AC | |
Indicators/settings | ||
Display elements | LED | |
Control elements | DIP-switch | |
Configuration | via DIP switches | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2006 For further information see system description. | |
Degree of protection | IEC 60529 | |
Protection against electrical shock | UL 61010-1 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Mass | approx. 100 g | |
Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) | |
Mounting | on Termination Board | |
Coding | pin 1, 3 and 4 trimmed For further information see system description. | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | BASEEFA 10 ATEX 0263X | |
Marking | II (1)GD, I (M1), [Ex ia] IIC, [Ex iaD], [Ex ia] I (-20 °C &le, Tamb &le, 60 °C) [circuit(s) in zone 0/1/2] | |
Voltage | 12.4 V | |
Current | 17.4 mA | |
Power | 54 mW | |
Supply | ||
Maximum safe voltage | 253 V (Attention! The rated voltage can be lower.) | |
Output | ||
Maximum safe voltage | 253 V (Attention! The rated voltage can be lower.) | |
Certificate | BASEEFA 10 ATEX 0264X | |
Marking | II 3G Ex nA II T4 | |
Galvanic isolation | ||
Input/Output | safe galvanic isolation acc. to IEC 60079-11, voltage peak value 375 V | |
Input/power supply | safe galvanic isolation acc. to IEC 60079-11, voltage peak value 375 V | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
International approvals | ||
UL approval | ||
Control drawing | 116-0333 (cULus) | |
IECEx approval | IECEx BAS 10.0122X IECEx BAS 10.0123X | |
Approved for | [Zone 0] [Ex ia] IIC, [Ex iaD], [Ex ia] I Ex nA II T4 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |