We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
KFU8-SR-1.3L.V
Part number
213968
Type
Switch Amplifier
Description
Switch Amplifier, Timer Relay KFU8-SR-1.3L.V
Stock availability:
On request
General specifications | ||
---|---|---|
Signal type | Digital Input | |
Supply | ||
Connection | terminals 14, 15 | |
Rated voltage | 20 ... 48 V DC or 90 ... 253 V AC , 45 ... 65 Hz | |
Rated current | &le, 230 mA | |
Power dissipation | 2.3 W | |
Power consumption | max. 4.5 W | |
Input | ||
Connection side | field side | |
Connection | terminals 1+, 2, 3- | |
Rated values | 22 ... 24 V DC / 100 mA , see additional information | |
Short-circuit current | max. 125 mA | |
Switching point | PNP: 0-signal: <12.5 V1-signal:> 13.5 V NPN and push-pull output: 0-signal: <4.5 V1-signal:> 5.5 V | |
Output | ||
Connection side | control side | |
Connection | output I: terminals 7, 8, 9 output II: terminals 10, 11, 12 | |
Output I, II | signal, relay | |
Contact loading | 250 V AC / 2 A / cos &phi, &ge, 0.7 , 125 V AC/4 A/ cos &phi, > 0.7 , 40 V DC / 2 A | |
Mechanical life | 20 x 106 switching cycles | |
Electrical life | 0.2 x 106 switching cycles (40 V DC, 2 A, ohmic) 0.4 x 106 switching cycles (253 V AC, 2 A, cos &phi, = 1) 0.25 x 106 switching cycles (253 V AC, 2 A, cos &phi, = 0.7) | |
Minimum load | 50 mW, 5 V DC | |
Energized/De-energized delay | &le, 90 ms / &le, 90 ms | |
Transfer characteristics | ||
Switching frequency | &le, 5 Hz for delay 0 s adjustable energized/de-energized delay: 0 ... 79 s | |
Galvanic isolation | ||
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Output/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Indicators/settings | ||
Display elements | LEDs | |
Control elements | DIP-switch | |
Configuration | via DIP switches | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Low voltage | ||
Directive 2014/35/EU | EN 61010-1:2010 | |
Conformity | ||
Electromagnetic compatibility | NE 21:2012 | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Mass | approx. 166 g | |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
Supply | 48 V DC | |
Certificate | PF 10 CERT 1417 X | |
Marking | II 3G Ex nA nC IIC T4 Gc | |
Output I, II | ||
Contact loading | 50 V AC/2 A/cos &phi, > 0.7, 40 V DC/1 A resistive load | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |