WE 77/EX-2 230V Pepperl+Fuchs 129198
 WE 77/EX-2 230V Pepperl+Fuchs 129198

We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.

Pepperl+Fuchs WE 77/EX-2 230V 129198

Manufacturer

Pepperl+Fuchs

Country

Germany

Name

WE 77/EX-2 230V

Part number

129198

Description

  • 2-channel
  • Control circuit EEx ia IIC
  • 230 V AC supply voltage
  • Reversible mode of operation
  • Lead breakage (LB) monitoring
  • 1 relay contact output (change-over contact) per channel

Stock availability:

On request

366.1 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications WE 77/EX-2 230V 129198

The device transfers digital signals into hazardous areas. Sensors per EN 60947-5-6 (NAMUR) or mechanical contacts may be used as transmitters. The control circuit is monitored for lead breakage (LB).

Features WE 77/EX-2 230V 129198

General specifications
Signal typeDigital Input
Supply
Connectionterminals 17, 18
Rated voltage198 ... 253 V AC , 45 ... 65 Hz
Power dissipation2.5 W
Power consumptionapprox. 3.2 VA
Input
Connection sidefield side
Connectionterminals 1-, 2+, 8+, 9-
Rated valuesacc. to EN 60947-5-6 (NAMUR), see system description for electrical data
Open circuit voltage/short-circuit currentapprox. 8 V DC / approx. 8 mA
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Pulse/Pause ratiomin. 0.5 ms / min. 0.5 ms
Line fault detectionbreakage I &le, 0.1 mA
Output
Connection sidecontrol side
Connectionterminals 10, 11, 12, 13, 14, 15
Outputsignal , relay
Contact loading253 V AC/2 A/500 VA/cos &phi, min. 0,7, 125 V AC/4 A/500 VA cos &phi, min. 0,7, 40 V DC/2 A/80 W ohmic load
Energized/De-energized delayapprox. 10 ms / approx. 20 ms
Mechanical life107 switching cycles
Transfer characteristics
Switching frequency< 10 Hz
Galvanic isolation
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output/power supplybasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elementsLEDs
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Conformity
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Massapprox. 410 g
Dimensions60 x 104 x 110 mm (2.4 x 4.1 x 4.3 inch)
Data for application in connection with hazardous areas
EU-Type Examination CertificatePTB 02 ATEX 2065
Marking II (1)GD [EEx ia] IIC [circuit(s) in zone 0/1/2]
InputEx ia
Voltage13.4 V DC
Current31 mA
Power145 mW (trapezoid characteristic curve)
Supply
Maximum safe voltage253 V AC (Attention! The rated voltage can be lower.)
Output
Maximum safe voltage253 V AC (Attention! The rated voltage can be lower.)
Galvanic isolation
Input/Outputsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supplysafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.