We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
HiD2038
Part number
121484
Type
Current Driver
Description
SMART Current Driver HiD2038
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| General specifications | ||
|---|---|---|
| Signal type | Analog output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | SL1: 1a(-), 1b(-), 2a(+), 2b(+) | |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board | |
| Rated current | 40 mA at 24 V, 20 mA output (per channel) | |
| Power dissipation | 0.85 W at 24 V (per channel) | |
| Input | ||
| Connection side | control side | |
| Connection | SL1: 8a(+), 7a(-), 10a(+), 9a(-) | |
| Input current | 4 ... 20 mA , reverse polarity protected | |
| Signal level | input voltage drop < 4 V with field wiring intact input current < 1.2 mA with field wiring open | |
| Output | ||
| Connection side | field side | |
| Connection | SL2: 5a(+), 5b(-), 1a(+), 1b(-) | |
| Load | 0 ... 750 &Omega, | |
| Output signal | 4 ... 20 mA | |
| Ripple | 15 mV eff | |
| Response time | 50 ms , 10 ... 90 % step change | |
| Line fault detection | breakage, load > 100 k&Omega,, short-circuit, load < 70 &Omega, | |
| Fault indication output | ||
| Connection | SL1: 6b | |
| Output type | open collector transistor (internal fault bus) | |
| Transfer characteristics | ||
| Accuracy | < ± 0.1 % of full-scale value | |
| Influence of temperature | < ± 0.01 %/K | |
| Frequency range | 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz) for use with SMART positioners using HART protocol | |
| Influence of load | < ± 0.1 % of full-scale value from 0 ... 750 &Omega, | |
| Linearity | < ± 0.1 % of full-scale value | |
| Galvanic isolation | ||
| Input/input | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 For further information see system description. | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 140 g | |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) | |
| Mounting | on Termination Board | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | CESI 02 ATEX 086 | |
| Marking | II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC | |
| Certificate | PF 11 CERT 2109 X | |
| Marking | II 3G Ex nA IIC T4 Gc [device in zone 2] | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 366-005CS-12B (cCSAus) | |
| IECEx approval | IECEx TUN 04.0012 | |
| Approved for | [Ex ia] IIC |
