We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NJ1,5-18GM-N-D
Part number
106342
Type
Inductive sensor
Description
Inductive sensor NJ1,5-18GM-N-D
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you require NJ1,5-18GM-N-D 106342 from manufacturer Pepperl+Fuchs, please contact FAMAGA.
For more than 10 years our employees supply spare parts for the upgrade and maintenance of various types of technical equipment from all corners of the earth. Over 750 orders from clients from different countries are arrived daily. Developed partner network makes it possible to immediately implement order for Pepperl+Fuchs NJ1,5-18GM-N-D, while the client does not have to worry about extra costs.
Geography of deliveries covers Europe, Asia, America and Africa. Australia, India, Indonesia, United States, Guinea, Japan, Grenada, Saudi Arabia, Nigeria, South Africa, Cameroon, Djibouti, Romania, Andorra, Burundi, Gabon, Czech Republic, Brazil, Madagascar, Eswatini, Guatemala, Slovakia, Morocco, San Marino, Pakistan, Zambia, Sweden, Philippines, Ghana, Uruguay, Albania, Honduras, Togo, Yemen, Vietnam, Tanzania, Mongolia, Namibia, Mauritania, Malta, Senegal, Palestine, Myanmar, El Salvador, Bahamas, Netherlands, Chile, Eritrea, Lebanon, Ethiopia, Benin, Panama, Kiribati, Dominica, Montenegro, Iraq, Haiti, Lesotho, Uzbekistan, Bangladesh, Colombia, Guinea-Bissau, Belize There is no restrictions on the size and mass of the cargo. We developed different delivery options so that a buyer can choose suitable balance between cost and delivery time.
Company`s main principle of operation is transparency, which includes every segment of activity. Buyers get only high-quality products, to which factory warranty applies. All repair parts and equipment are original, likelihood of counterfeits are excluded. For permanent partners there are very good terms and they are valid special pricing.
Become an orderer from FAMAGA, get machine-tools with no delay and at attractive price. Fill in the order form on the website. Our specialist will contact you to discuss nuances. Orders are also accepted by phone.
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 1.5 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 1.22 mm | |
| Reduction factor rAl | 0 | |
| Reduction factor rCu | 0 | |
| Reduction factor r304 | 0.55 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 k&Omega,) | |
| Switching frequency | 0 ... 400 Hz | |
| Hysteresis | typ. % | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | &le, 1 mA | |
| Limit data | ||
| Operating pressure | 350 bar (5076.4 psi) | |
| Functional safety related parameters | ||
| MTTFd | 10880 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 012/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 2 m | |
| Core cross-section | 0.34 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | Ceramic | |
| Degree of protection | IP66 / IP68 | |
| Cable | ||
| Cable diameter | 4.8 mm ± 0.2 mm | |
| Bending radius | > 10 x cable diameter | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 2G Ex ia IIC T6&hellip,T1 Gb The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
| Appropriate type | NJ1,5-18GM-N-D.. | |
| Effective internal capacitance | max. 50 nF , a cable length of 10 m is considered. | |
| Effective internal inductance | max. 60 µ,H , a cable length of 10 m is considered. | |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. | |
| Equipment protection level Da | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 1D Ex ia IIIC T135°C Da The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
| Appropriate type | NJ1,5-18GM-N-D.. | |
| Effective internal capacitance | max. 50 nF , a cable length of 10 m is considered. | |
| Effective internal inductance | max. 60 µ,H , a cable length of 10 m is considered. | |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EC-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained. | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 2G, 1D |
