We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
OBR2000-R3-E2-0,2M-V3-L
Part number
282070
Type
Retroreflective Sensor
Description
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Product Description |
|---|
| Laser retroreflective sensor, ultra-small design with M3 mounting, polarization filter, 2000 mm detection range, PNP output, 200 mm fixed cable with plug M8, 3-pin |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 2 m | |
| Reflector distance | 40 ... 2000 mm | |
| Threshold detection range | 2.3 m | |
| Reference target | H40 reflector | |
| Light source | laser diode | |
| Light type | modulated visible red light , 680 nm | |
| Polarization filter | yes | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | 680 nm | |
| Beam divergence | > 5 mrad | |
| Pulse length | approx. 3 µ,s | |
| Repetition rate | approx. 16.6 kHz | |
| max. pulse energy | 8 nJ | |
| Diameter of the light spot | approx. 35 mm at a distance of 2000 mm | |
| Angle of divergence | approx. 0.5 ° | |
| Optical face | frontal | |
| Ambient light limit | EN 60947-5-2 : 30000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 800 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) | |
| Function indicator | LED yellow: lights up when receiving the light beam , flashes when falling short of the stability control, OFF when light beam is interrupted | |
| Electrical specifications | ||
| Operating voltage | 12 ... 24 V | |
| No-load supply current | < 10 mA | |
| Protection class | III | |
| Output | ||
| Switching type | NO contact | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 50 mA , resistive load | |
| Voltage drop | &le, 1.5 V DC | |
| Switching frequency | approx. 2 kHz | |
| Response time | 250 µ,s | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2007 | |
| Approvals and certificates | ||
| UL approval | E87056 , cULus Recognized, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated &le,36 V | |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Mechanical specifications | ||
| Housing width | 7.5 mm | |
| Housing height | 26 mm | |
| Housing depth | 13.8 mm | |
| Degree of protection | IP67 | |
| Connection | 200 mm fixed cable with 3-pin, M8 x 1 connector | |
| Material | ||
| Housing | PC/ABS and TPU | |
| Optical face | glass | |
| Cable | PUR | |
| Mass | approx. 10 g | |
| Cable length | 200 mm |
