ED2-VM-Ex2.35 Pepperl+Fuchs 049394
 ED2-VM-Ex2.35 Pepperl+Fuchs 049394

We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.

Pepperl+Fuchs ED2-VM-Ex2.35 049394

Manufacturer

Pepperl+Fuchs

Country

Germany

Name

ED2-VM-Ex2.35

Part number

049394

Description

  • 2-channel isolated barrier
  • 24 V DC supply
  • Output 18 mA at 16 V DC
  • Logic input

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications ED2-VM-Ex2.35 049394

This isolated barrier is used for intrinsic safety applications. The device supplies power to solenoids, LEDs and audible alarms located in a hazardous area. It is controlled via a logic signal. At full load, 16 V at 18 mA is available for the hazardous area application. The auxilliary supply of the solenoid driver can be activated with a control safe module per channel. A safety circuit is the result in this case.

Features ED2-VM-Ex2.35 049394

General specifications
Signal typeDigital Output
Supply
Connectiond14+, d16+, z14-
Rated voltage20 ... 30 V DC
Ripple&le, 10 %
Rated currentapprox. 150 mA
Input
Connectionchannel 1: d32, z32 channel 2: d30, z30
Input current5 mA
Signal level1-signal: 15 ... 30 V DC 0-signal: 0 ... 5 V DC
Response delay5 ... 30 ms (typical 10 ms)
Output
Connectionchannel 1: d2-, z2+ channel 2: d4-, z4+
Internal resistor400 &Omega,
Current18 mA
Voltage16 V
Open loop voltage24 V
Transfer characteristics
Switching frequency15 Hz
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECThe device has been used for the same applications for several years. It therefore features an appropriate electromagnetic field immunity. The device must not be used in new plants.
Conformity
Insulation coordinationEN 50178
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-25 ... 60 °C (-13 ... 140 °F)
Mechanical specifications
Degree of protectionIP20
Connection32-pin plug connector acc. to DIN 41612 , series 2 , type F , z and d provided
Massapprox. 220 g
Dimensions20 x 128 x 193 mm (0.8 x 5 x 7.6 inch)
Data for application in connection with hazardous areas
EC-Type Examination CertificatePTB 00 ATEX 2192 , for additional certificates see www.pepperl-fuchs.com
Group, category, type of protection II (1)GD [EEx ia] IIC
OutputEEx ia IIC
Voltage25.2 V
Current67.18 mA
Power423.46 mW (linear characteristic)
Galvanic isolation
Input/Outputsafe galvanic isolation acc. to EN 50020, voltage peak value 375 V
Directive conformity
Directive 94/9/ECEN 50014:1997, EN 50020:1994