We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand in Australia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300350
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6900 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you require 0821300350 from manufacturer Aventics (brand of Emerson), please contact FAMAGA.
For more than 8 years our specialists supply repair parts for the upgrade and maintenance different kinds of industrial equipment from all over the world. Over 750 orders from clients from various countries are in progress daily. Developed partner network provides an opportunity to execute without delay order for Aventics (brand of Emerson) , while the customer does not have to go over budget.
Geography of deliveries covers Europe, America, Asia and Africa. Australia, India, Indonesia, United States, Rwanda, Liechtenstein, Sierra Leone, Ecuador, United Arab Emirates, Honduras, Antigua and Barbuda, Barbados, New Zealand, Iceland, Poland, Morocco, Ethiopia, Azerbaijan, Zambia, Pakistan, Eritrea, Zimbabwe, Serbia, Equatorial Guinea, Egypt, Netherlands, Namibia, Peru, Eswatini, Swaziland, Montenegro, Jamaica, Togo, Libya, Fiji, Lebanon, Côte d\'Ivoire, Singapore, Palestine, Tanzania, China, Sri Lanka, Comoros, Central African Republic, Macedonia, Samoa, Bhutan, Venezuela, Senegal, Colombia, Philippines, Dominica, Haiti, Suriname, Botswana, Belize There is no restrictions on the size and mass of the cargo. We developed different delivery options so that a customer can choose optimal compromise between cost and delivery time.
Company`s main principle of operation is transparency, which includes every direction of activity. Customers get only high-quality products, to which factory warranty applies. All repair parts and equipment are original, risk of presence of counterfeits are excluded. For permanent customers there are bonus programs and they are valid special pricing.
Become a partner from FAMAGA, get industrial machinery with no delay and at profitable price. Fill in information in the order form on the website. Manager will contact you to specify details. Requests are also accepted by phone.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 6900 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 50 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |